If your com port is higher then 2 then you will have to change it to work with artcut. You will most likely be connected to the highest com port you see. Open up signcutx2, type something to test in the font box, go to settings, choose Bridge as manufacturer, choose your model next, (if you have the 12" Pro365 choose the 720), now click on Device and you will see a couple com ports available there.
#BRIDGE PRO 720 ARTCUT SOFTWARE#
We highly recommend usinig the Signcutx2 software first if you need to use the usb connection as signcut will work with all com ports as opposed to artcut which will only work with com 1 and com 2. Go to our Download page and download the usb driver. Unplug your usb cable from your computer.
#BRIDGE PRO 720 ARTCUT SERIAL#
If you are using the serial cable follow the same instructions and choose com 1.Ĭonnecting through usb is the only way which requires loading a driver. You should be able to use this device for all of our cutters.Ĩ Choose lpt1 for how you will connect (this is for using the Parallel Cable) Usually the 721DPML choice seems to work best. Add the cutter you have, if there is more then one add each of them. Go to cut/plot, in the "Device" box choose the manufacturer "Refine", NOT BRIDGE.ħ. Type something in the box in Artcut to testĦ. Connect the parallel cable to your computer and to the cutter and turn the cutter on.ĥ. Load the Artcut software, if you get a message saying "Install CD-R" then put the white disk in your drive and restart your computer and it will load by itself.Ĥ.
0 kommentar(er)
